Perimeter fencing systems
One product family covers most welded panel perimeter work: the 3D curved panel for residential and park boundaries, the framed panel for industrial sites, the twin-wire 8/6/8 panel for higher rigidity, the roll top BRC panel for decorative schemes, and the 358 anti-climb panel for high-security perimeters. All five share the same galvanized-and-coated steel construction, clamp fixing and palletized export packing, and are quoted together as one system: panels, posts, fixings and gates.
Also known as: Panel fence · Welded mesh fence · 3D fence · BRC fence · 2D fence · 358 fence · Euro fence
Five welded panel systems share the same galvanized steel construction, clamp fixing and export packing. Choose the panel that matches the site; heights and coatings are quoted per system on the same enquiry.
Lightweight bent-panel system for residential, parks and commercial boundaries.
Also known as: Euro fence · 3D fence · Curved wire fence · Bent panel fence
Horizontal bends pressed into each panel give the 3D fence its name. The bends add stiffness without extra wire, so a lighter panel can cover the same span. It is a common choice where appearance matters as much as strength.
| Mesh aperture | 50×200 mm standard; other apertures to order |
|---|---|
| Wire diameter | Inner core 3.5 mm; after coating 4.5 mm |
| Panel height | 1,030 / 1,230 / 1,530 / 1,730 / 2,030 mm |
| Panel width | 2,500 mm standard |
| Bends | 3 to 5 horizontal bends depending on panel height |
| Post section | 50×50 / 60×60 mm SHS, or peach-shaped post for residential use |
| Coating | Hot-dip galvanized ≥80 g/m² plus polyester powder coating ≥100 µm |
| Colours | Green, black, white and RAL colours on request |
| Packing | Palletized panels with corner protection |
Rigid framed panel for industrial and commercial perimeters.
Also known as: Panel fence · Welded mesh fence · Framed fence · Wire mesh panel fencing
A rigid welded mesh panel carried in a steel frame and fixed to square or rectangular posts. The most widely specified perimeter fence for industrial, commercial and public sites because it combines visibility, rigidity and predictable installation.
| Mesh aperture | 50×200 mm and 75×150 mm standard; other apertures to drawing |
|---|---|
| Wire diameter | Inner core 3.5–5.0 mm; after coating 4.5–5.0 mm |
| Panel size (H×W) | 630×2,500 mm to 2,430×2,500 mm; custom sizes available |
| Frame tube | 20×30×1.5 mm or 30×30×2.0 mm rectangular hollow section |
| Post section | 50×50 / 60×60 / 80×60 mm square or rectangular hollow section |
| Post wall thickness | 1.5–5.0 mm by site wind load and height |
| Coating | Hot-dip galvanized ≥80 g/m² with PVC or polyester powder coating ≥100 µm |
| Colours | RAL colours on request, including green, black, grey and blue |
| Fixing | Steel clamps with anti-theft bolts; optional full-length flat bar |
| Packing | Palletized panels and protected posts, loaded for container shipment |
Decorative rolled edge for parks, schools and residential schemes.
Also known as: BRC fence · Double circle fence · Roll top fence · Loop top fence
A welded panel with the horizontal wires rolled into a double circle along the top and bottom. The rolled edge removes exposed wire ends and softens the look of the fence, which suits parks, schools and residential boundaries.
| Mesh aperture | 50×150 mm standard; 50×200 mm and custom apertures available |
|---|---|
| Wire diameter | 3.0–5.0 mm |
| Panel height | 800 / 1,000 / 1,200 / 1,500 / 1,800 / 2,000 mm |
| Panel width | 2,000–2,500 mm |
| Edge treatment | Double circle roll top and bottom, or double horizontal wire |
| Post system | Round Ø48 mm or square posts fixed with steel clamps |
| Coating | Hot-dip galvanized ≥80 g/m² with PVC coating ≥0.5 mm |
| Colours | Green, black and RAL colours on request |
| Packing | Palletized panels with corner protection for export |
Twin-wire 8/6/8 panel for higher rigidity at the same height.
Also known as: 2D fence · 8/6/8 fence · Twin wire fence · Double rod fence
Twin horizontal wires welded either side of each vertical wire give the panel its name and its rigidity. The result is a fence that resists distortion better than a single-wire panel of the same height, which is why it is widely used on industrial and public boundaries.
| Panel designation | 8/6/8 (2 × 8.0 mm horizontal + 1 × 6.0 mm vertical). Other combinations on request |
|---|---|
| Mesh aperture | 50×200 mm standard; 50×100 mm and custom apertures available |
| Panel height | 630, 830, 1,030, 1,230, 1,430, 1,630, 1,830, 2,030, 2,230, 2,430 mm |
| Panel width | 2,500 mm standard |
| Post section | 60×60 mm or 80×60 mm SHS |
| Post wall thickness | 2.0–3.0 mm |
| Coating | Hot-dip galvanized ≥250 g/m² plus polyester powder coating ≥100 µm |
| Accessories | Full-length flat bar, steel clamps, anti-theft bolts, rain caps |
| Packing | Palletized panels, posts bundled separately and protected for export |
Narrow-aperture anti-climb panel for high-security perimeters.
Also known as: 358 fence · Anti-climb fence · Prison mesh fence · High security mesh fence
The 358 fence takes its name from its narrow 76.2 × 12.7 mm aperture, which is too small for a hand or foot to gain purchase. Combined with a heavy wire and reinforced posts, it is the standard panel fence for sites where intrusion delay matters.
| Aperture | 76.2×12.7 mm (3 in × 0.5 in), the origin of the name "358" |
|---|---|
| Wire diameter | Inner core 4.0 mm; after coating 4.8–5.0 mm |
| Panel height | 1,800 / 2,400 / 3,000 / 3,600 mm; other heights to order |
| Panel width | 2,515 mm standard, or made to the project drawing |
| Post section | 60×60 mm SHS with a full-length flat bar to carry the panel |
| Fixings | Anti-tamper security bolts or shear nuts; fixings are not removable with standard tools |
| Coating | Hot-dip galvanized ≥250 g/m² plus polyester powder coating ≥100 µm |
| Topping options | Barbed wire, razor wire or small-aperture mesh over the panel |
| Packing | Steel or wooden pallets, export packed |
Construction, fixing and packing common to every system on this page. Per-system dimensions are listed in each variant above.
| Panel width | 2,500 mm standard on all five systems |
|---|---|
| Panel heights | 630–2,430 mm depending on system; custom heights to order |
| Coating systems | Hot-dip galvanized (≥80 or ≥250 g/m² by exposure class) with optional PVC or polyester powder top coat ≥100 µm |
| Colours | Green, black, white, grey and other RAL colours on request |
| Fixing | Steel clamps with anti-theft bolts; optional full-length flat bar on twin-wire and 358 panels |
| Packing | Palletized panels with corner protection; posts bundled and wrapped for container shipment |
| Standards referenced | EN 10244-2, ASTM A641, ISO 1461 (stated only when specified on the order) |
| Wire core | Low-carbon steel wire, tensile strength to order |
|---|---|
| Coating system A | Hot-dip galvanized ≥80 g/m² only, for inland and low-corrosion sites |
| Coating system B | Hot-dip galvanized ≥250 g/m² plus powder or PVC ≥100 µm, for coastal and industrial sites |
| Post material | Pre-galvanized or hot-dip galvanized steel tube, SHS or round |
| Gates | Single and double leaf, sliding and cantilever gates in matching coating and colour |
Typical configuration
Framed or 8/6/8 panel, H 2,030–2,430 mm
Rigidity around plant, storage and loading areas with vehicle gates.
Typical configuration
Framed / double wire panel, powder coated
Long straight runs; colour matched to the building facade.
Typical configuration
3D or BRC roll top panel, H 1,030–1,830 mm
No exposed sharp edges; appearance-led selection.
Typical configuration
358 anti-climb panel, H 2,400–3,000 mm
Narrow aperture with anti-tamper fixing; optional topping.
Match the panel to the job: 3D or BRC roll top for appearance-led residential and park work, framed or double wire for industrial and logistics perimeters, and 358 where climbing or cutting resistance decides the specification. Heights and coatings are quoted per system on the same enquiry.
They share the same galvanized SHS post range and clamp fixing method. Post section and wall thickness are selected from the fence height and wind exposure, and the 358 panel additionally uses a full-length flat bar with anti-tamper bolts.
The double wire (8/6/8) panel uses two 8.0 mm horizontal wires for rigidity at a standard 50×200 mm aperture. The 358 panel uses a tight 76.2×12.7 mm aperture and heavier wire so it resists climbing and cutting; it is the choice for prisons, data centres and other high-security perimeters.
The welded panel family extended to tall sports perimeter heights.
View specifications →
Flexible roll fence for the same garden and park boundaries.
View specifications →
Standard topping where perimeter security must be raised.
View specifications →Send the system or application, panel height, total fence length and coating so we can quote panels, posts, fixings and gates as one package.
Send Your Requirement