Why is it called a Y-shape fence?
The post carries a welded V (Y) shaped support arm that holds the concertina razor wire away from the panel, so the topping cannot be reached or cut from the ground side.
High-security perimeter
The airport fence, also called Y-shape security fence, combines a rigid welded mesh panel with a V-shaped support arm that carries concertina razor wire on top. Galvanized and polyester powder coated, it is the standard perimeter for airports, military zones, ports and other high-security sites.
Also known as: Y-shape security fence · Y-post fence · Airport perimeter fence · V-arm security fence
Typical range. Final dimensions, coating mass and tolerances are confirmed on the order drawing.
| Height | 2,400 / 2,700 / 3,000 mm, measured to the top of the razor wire |
|---|---|
| Mesh size | 50×100 / 50×150 / 50×200 mm welded mesh panel |
| Wire thickness | 4.0 / 4.5 / 5.0 mm low-carbon steel wire |
| Post | 60×60 mm square post with welded Y (V) arm for the topping |
| Panel fixing | Anti-UV plastic clamp or metal clamp with anti-theft bolt |
| Razor wire | Concertina coil Ø450–1,000 mm, blade type BTO-22 standard, others on request |
| Post cap | Metal cap or anti-UV plastic cap |
| Surface | Hot-dip galvanized 505 g/m², or electric galvanized + polyester powder coating in RAL colours |
| Packing | Palletized panels and bundled posts, wrapped for container shipment |
| Panel wire | Low-carbon steel wire, resistance welded, zinc coated |
|---|---|
| Zinc coating | Hot-dip galvanized 505 g/m² for long service life; 100 g/m² pre-galvanized + powder coat as an economical option |
| V-arm | Welded to the post, sized to carry one to three concertina coils |
| Clamps | Anti-UV plastic or galvanized steel, anti-theft bolt option |
| Colours | RAL 6005 green, RAL 9005 black and other RAL colours on the powder coat |
Typical configuration
H 3,000 mm, V-arm with 3 razor wire coils
Airside and landside perimeter with monitored fence lines.
Typical configuration
H 2,700–3,000 mm, anti-tamper clamps
Climb-resistant topping with clear zones on both sides.
Typical configuration
H 2,400–2,700 mm, powder coated
Secures cargo handling and storage areas against intrusion.
Typical configuration
H 2,400–3,000 mm, galvanized
Substations, solar farms and utility corridors.
The post carries a welded V (Y) shaped support arm that holds the concertina razor wire away from the panel, so the topping cannot be reached or cut from the ground side.
Standard concertina coils of 450–1,000 mm diameter clip straight onto the arm. BTO-22 is the common blade type; BTO-10/12/30 and CBT types are available for specific requirements.
Both. Hot-dip galvanizing at 505 g/m² gives the longest service life for coastal and industrial sites; electric galvanizing plus a polyester powder coat in RAL colours is the economical alternative.
Concertina coils and barbed wire for the V-arm topping.
View specifications →The 358 anti-climb panel suits inner security lines at the same site.
View specifications →Tall welded panel system for sports boundaries.
View specifications →Send the fence height, mesh size, razor wire type and total length. We quote panels, Y-posts, topping and gates as one system.
Send Your Requirement