How many barriers fit in a container?
A 20GP container typically takes 500–600 standard barriers stacked flat on pallets, depending on the frame tube size and feet type. We confirm the loading plan with the quotation.
Temporary pedestrian barrier
Crowd Control Barrier (Pedestrian Barrier)
The crowd control barrier is a rigid welded steel frame with vertical infill tubes and a flat safety foot. Barriers hook together in seconds to form a continuous line, then unhook and stack flat for transport. Heavy hot-dip galvanizing stands up to rental rotation and outdoor storage, which is why this is the standard barrier for events, roadworks and public-order duty worldwide.
›Size: 1,100×2,200 mm standard
›Frame: Ø32 / Ø38 / Ø42 mm tube, wall 1.5–2.0 mm
›Infill: vertical tubes Ø16 / Ø20 mm at 100–150 mm centres
›Feet: flat steel safety feet, bolted or welded
›Finish: hot-dip galvanized ≥250 g/m² (pre-galvanized tube option)
›Connection: hook-and-eye interlock, line bends and corners without gaps
Also known as: Pedestrian barrier · Steel barricade · Crowd barrier · Temporary barrier · Mojo barrier
Specification Parameters
Typical range. Final dimensions, coating mass and tolerances are confirmed on the order drawing.
| Barrier size (H×L) | 1,100×2,200 mm standard; 1,100×2,000 / 1,100×2,500 mm available |
|---|---|
| Frame tube | Ø32 / Ø38 / Ø42 mm, wall 1.5–2.0 mm |
| Infill tubes | Ø16 / Ø20 mm vertical tubes, 100–150 mm centres |
| Feet | Flat steel safety feet, bolted (removable) or welded; bridge feet on request |
| Connection | Hook and eye interlock both ends; corner and line bends form without gaps |
| Finish | Hot-dip galvanized ≥250 g/m² after welding, or pre-galvanized tube with welded joints dressed |
| Packing | 30–40 units per bundle or palletized, stacked flat for container loading |
Product Photos
Materials & Coating Options
| Tube | Low-carbon structural steel tube to the sizes above |
|---|---|
| Finish | Hot-dip galvanizing for rental-grade rotation; powder coating available for city events |
| Feet | Flat steel plate feet with rounded corners; bolted feet remove for stacking |
| Options | Custom branding plates, reflective strips, and base weights for wind exposure |
Typical Applications
Events and festivals
Typical configuration
1,100×2,200 mm, hook interlock lines
Queue lines, stage fronts and controlled access points.
Construction sites
Typical configuration
Flat feet, hot-dip galvanized
Separates the public from work zones and plant movements.
Roadworks and utilities
Typical configuration
Reflective strips, weighted bases
Temporary diversion lines around open excavations.
Public buildings and transit
Typical configuration
RAL powder coat option
Guidance barriers at stations, venues and government sites.
Frequently Asked Questions
Flat feet or bridge feet?
Flat safety feet are the international standard: they sit low, do not create a trip edge and are safe in crowds. Bridge feet span curbs and cables but stand higher, so they are used mainly at roadworks.
What is the difference between rental-grade and event-grade?
Rental-grade barriers use heavier tube and full hot-dip galvanizing after welding so they survive years of rotation. Event-grade may use lighter tube and pre-galvanized material where appearance and one-off use matter more than lifespan.
Related Products
Steel Picket Fence
Permanent tubular steel fencing from the same fabrication line.
View specifications →
Welded Wire Mesh & Fabricated Panels
Mesh for temporary hoarding and site enclosure panels.
View specifications →
Chain Link Fence
Temporary diamond mesh enclosure for longer site boundaries.
View specifications →Need crowd control barriers by the container?
Send the quantity, tube sizes, feet type and finish. We will quote the loading plan and the freight to your port.
Send Your Requirement